Four straight series E Interceptors in different sizes.

SERIES E INTERCEPTORS

Series E is a family of large, fast-acting interceptors that includes four straight, three tunnel and four chine models.

Series E Fast-acting Interceptors for a smoother boat ride

Series E is a family of large, fast-acting interceptors that includes four straight, three tunnel and four chine models. Their blade rate and stroke are 40 mm/s and 60 mm respectively. The large, modular design made for mass production means the interceptors are durable, affordable and particularly well adapted to any planing or semi-planing boat up to 30 m (100 ft).

All components have been meticulously engineered to withstand impact and avoid water ingress, minimizing the risk of costly maintenance and downtime. Interceptor or blade actuation takes place by way of calibration-free submersible electric servos in the interceptor unit. Natural water cooling provides excellent working conditions for the brushless DC servo motors, which run on 12-32 volts.

Installation is made easy with an integral mounting plate and the option of a concealed or above- waterline, self-sealing, thru-hull cable fitting. The preferred mounting option is achieved by simply routing the servo cable differently. Each interceptor comes with the thru-hull cable fitting, cable cover and a practical drill template.

For best effect, different size interceptors can be combined to span as much of the transom edge as possible. A full beam is always the optimal arrangement from a lift-to-drag ratio point of view.

Straight

Straight interceptors come in a wide range of sizes including the following models IT400-E, IT600-E, IT800-E and IT1000-E for modular use.

Tunnel

Tunnel-shaped interceptors provide the perfect lift-force solution for hulls with propeller tunnels. In contrast to straight interceptors, the tunnel interceptor’s constant radius curvature allows mounting above the propeller tunnel to fully or partially use the otherwise unutilized part of the beam for lift generation.

The three tunnel models with different radii, R500, R600 and R800, make sure that most large boat propeller tunnels can be covered with negligible deviation between hull and interceptor curvature. Tunnel interceptors can be included in new installations, or retro-fitted to systems already installed.

CHINE

Chine interceptors provide a unique means of maximizing pitch and roll motion control by utilizing the furthest outboard surfaces of the hull bottom for lift generation.

As a rule, the lift effect of a chine interceptor matches the lift of a straight interceptor one size larger mounted inboard of the chine, making them the go-to choice when selecting interceptors.

Chine interceptors are particularly useful when transom space is limited abeam of swim platform lifts, waterjets, surface drives, or outboards.

Round

The curved interceptor provides a solution for vessels with convex hulls, complementing our extensive range of straight, tunnel, V-shaped, and chine interceptors.

The possibility of rounded hulls having a curved interceptor results in faster and more precise trim control. With the latest addition of the curve interceptor, we can now provide an efficient solution that fits virtually any hull.

 

FAST ACTUATION

MODULAR DESIGN

OUTBOARD MOUNT

NO CORROSIVE MATERIALS

  • True outboard mount
  • Modular design
  • Fast actuation
  • Straight, tunnel and chine models
  • Integrated mounting plate
  • Thru hull fitting options - Above waterline - Concealed behind interceptor
  • Submersible servo units
  • Brushless 12-24V DC servo motor
  • Durable and accessible
  • Calibration free
  • Auto Cleaning - Selectable periodic cleaning cycle - Prevents fouling inside the interceptor
  • No corrosive materials

SPECIFICATIONS

Model
IT400-E / IT600-E / IT800-E / IT1000-E
Length mm (in)
400 (15.7) / 600 (23.6) / 800 (31.5) / 1000 (39.4)
Weight kg (lbs)
5.0 (11.0) / 7.3 (16.1) / 800 (31.5) / 11.5 (25.4)
Servo actuator
SU-400E / SU-E / SU-E / SU-E
Max. Boat Speed
60 knots
Blade Stroke
60 mm (2.4 in)
Blade Rate
40 mm/s (1.6 in/s)
Thru-Hull Cable Fitting
Concealed or above waterline
Cable Length
3 m (10 ft), extendable up to 6 m (20 ft)
Cable Material
PUR
Connector
M12 5-pin circular
Connector Diameter
14.5 mm (0.57 in)
Supply Voltage
12 - 32 V DC
Power Consumption
25 W max/servo unit
Operating Temperature
0° to +40°C (+32° to +104°F)
Storage Temperature
-40° to +90°C (-40° to +194°F)
Waterproof Rating
IP68 5 m (16 ft)
Compliance
CE, FCC
Model
IT600-E TUNNEL R500 / IT600-E TUNNEL R600 / IT600-E TUNNEL R800
Length mm (in)
600 (24) / 600 (24) / 600 (24)
Weight kg (lbs)
8.4 (18.5) / 8.2 (18.1) / 7.9 (17.4)
Servo actuator
SU-400E / SU-E / SU-E
Max. Boat Speed
60 knots
Blade Stroke
60 mm (2.4 in)
Blade Rate
40 mm/s (1.6 in/s)
Thru-Hull Cable Fitting
Concealed or above waterline
Cable Length
3 m (10 ft), extendable up to 6 m (20 ft)
Cable Material
PUR
Connector
M12 5-pin circular
Connector Diameter
14.5 mm (0.57 in)
Supply Voltage
12 - 32 V DC
Power Consumption
25 W max/servo unit
Operating Temperature
0° to +40°C (+32° to +104°F)
Storage Temperature
-40° to +90°C (-40° to +194°F)
Waterproof Rating
IP68 5 m (16 ft)
Compliance
CE, FCC
Model
IT400-E CHINE PORT / IT400-E CHINE STBD / IT600-E CHINE PORT / IT600-E CHINE STBD
Length mm (in)
400 (15.7) / 400 (15.7) / 600 (24) / 600 (24)
Weight kg (lbs)
5.1 (11.2) / 5.1 (11.2) / 7.4 (16.3) / 7.4 (16.3)
Servo actuator
SU-400E / SU-400E / SU-E / SU-E
Max. Boat Speed
60 knots
Blade Stroke
60 mm (2.4 in)
Blade Rate
40 mm/s (1.6 in/s)
Thru-Hull Cable Fitting
Concealed or above waterline
Cable Length
3 m (10 ft), extendable up to 6 m (20 ft)
Cable Material
PUR
Connector
M12 5-pin circular
Connector Diameter
14.5 mm (0.57 in)
Supply Voltage
12 - 32 V DC
Power Consumption
25 W max/servo unit
Operating Temperature
0° to +40°C (+32° to +104°F)
Storage Temperature
-40° to +90°C (-40° to +194°F)
Waterproof Rating
IP68 5 m (16 ft)
Compliance
CE, FCC
Model
IT400-E ROUND R1000
Length mm (in)
400 (15.7)
Weight kg (lbs)
5.2 (11.5)
Servo actuator
SU-400E
Max. Boat Speed
60 knots
Blade Stroke
60 mm (2.4 in)
Blade Rate
40 mm/s (1.6 in/s)
Thru-Hull Cable Fitting
Concealed or above waterline
Cable Length
3 m (10 ft), extendable up to 6 m (20 ft)
Cable Material
PUR
Connector
M12 5-pin circular
Connector Diameter
14.5 mm (0.57 in)
Supply Voltage
12 - 32 V DC
Power Consumption
25 W max/servo unit
Operating Temperature
0° to +40°C (+32° to +104°F)
Storage Temperature
-40° to +90°C (-40° to +194°F)
Waterproof Rating
IP68 5 m (16 ft)
Compliance
CE, FCC

ORDERING DATA

Model
Part No.
IT400-E
2012215 Comes with Cable 3 m and Cable Cover
IT600-E
2012018 COMES WITH CABLE 3 M AND CABLE COVER
IT800-E
2012019 COMES WITH CABLE 3 M AND CABLE COVER
IT1000-E
2012020 COMES WITH CABLE 3 M AND CABLE COVER
  • Included in Kit Boxes
  • Available as an Accessory
  • Available as a Spare Part
Model
Part No.
IT600-E TUNNEL R500
2012021 Comes with Cable 3 m and Cable Cover
IT600-E TUNNEL R600
2012022 COMES WITH CABLE 3 M AND CABLE COVER
IT600-E TUNNEL R800
2012023 COMES WITH CABLE 3 M AND CABLE COVER
  • Available as an Accessory
  • Available as a Spare Part
Model
Part No.
IT400-E CHINE PORT
2012216 Comes with Cable 3 m and Cable Cover
IT400-E CHINE STBD
2012217 COMES WITH CABLE 3 M AND CABLE COVER
IT600-E CHINE PORT
2012024 COMES WITH CABLE 3 M AND CABLE COVER
IT600-E CHINE STBD
2012025 COMES WITH CABLE 3 M AND CABLE COVER
  • Included in Kit Boxes
  • Available as an Accessory
  • Available as a Spare Part
Model
Part No.
IT400-E ROUND R1000
2012491 COMES WITH CABLE 3 M AND CABLE COVER
  • Included in Kit Boxes
  • Available as an Accessory
  • Available as a Spare Part

Zipwake Series E