Home/SERIES E/Control panel

CONTROL PANEL

Zipwake’s stylish control panel is carefully designed to be user-friendly and intuitive to allow the helmsman to focus on the right thing – enjoying the boat ride!

Find distributors

You are in charge

The panel’s two unique control wheels provide easy, quick and intuitive manual control of running trim, heel or heading. However, the system normally operates in automatic control mode, which is enabled by a single press on the AUTO button. In this mode, the built-in high-frequency GPS, 3D gyro sensors and robust motion controller automatically ensure dynamic elimination of un- comfortable and dangerous boat pitch and roll.

Push the AUTO BUTTON – and GO!

The system provides continuous feedback of boat speed, turning radius, pitch and roll angle, as well as the interceptors’ positions, on a 2.8” sunlight- readable wide viewing color display.

The panel’s waterproof design withstands harsh marine conditions in open boats or on a flybridge. The sockets for connecting peripherals are located on the rear of the panel. In addition to connectors for the system’s distribution unit and multiple control panels, external GPS and NMEA 2000 equipment can be connected. The system can also be connected to the ignition key for automatic system power-on. A waterproof cap conceals the USB interface that allows for future software upgrades and ensures that the Zipwake Dynamic Trim Control System is future-proof.

Short facts

FULLY AUTOMATIC

INTERNAL GPS & 3D GYRO

WATERPROOF BY DESIGN

SUNLIGHT READABLE

  • Fully automatic - Dynamic pitch and roll control - Steering and turn enhancement
  • Built-in GPS and motion sensors
  • Unique and intuitive 3D controls
  • Sunlight readable color display
  • Instant state user feedback
  • Auto power on/off via ignition key sense
  • Full range of electrical interfaces
  • Waterproof
  • Auto dimming / night mode
  • Upgradable via USB stick
  • Supports up to 3 additional Control Panels in the system
  • Surface, flush or gimbal bracket mount
  • Manages installation configurations from 1 to 6 Series E dual-servo interceptors or any mix with single-servo interceptors
  • Allows configuration of interceptor pair function
  • Auto Cleaning - Selectable periodic cleaning cycle - Prevents fouling inside the interceptor
  • Monitored and/or controlled from external devices, e.g. multifunction displays or plotters via its NMEA 2000 interface

  • I-BUS IN (CAN bus)
  • I-BUS OUT (CAN bus)
  • NMEA 2000
  • Key sense
  • USB Device Port (Type A)
  • USB Host Port (Type B)
  • External GPS (NMEA 0183 / RS232 auto baud-rate sensing)

SPECIFICATIONS

Model
CP-E
Display
2.8’’ IPS color TFT LCD, 320 x 240 pixels, double-sided, anti-reflection coated window
Internal sensors
5 Hz GPS, 3D Gyro, 3D Accelerometer, Ambient light
Supply Voltage
12 - 32 V DC
Power Consumption
10 W max
Operating Temperature
-20° to +85°C (-4° to +185°F)
Storage Temperature
-40° to +90°C (-40° to +194°F)
Waterproof Rating
IP67 / IP64 (front / back)
Compass Safe distance
0.5 m (1.7 ft)
Compliance
CE, FCC
Weight
0.22 kg (0.49 lbs)
Mounting
Surface, flush or gimbal bracket mount

ORDERING DATA

Model
Part No.
CP-E
2012032 with Standard Cable 15 m
  • Included in Kit Boxes
  • Available as an Accessory
  • Available as a Spare Part

SERIES E PARTS & ACCESSORIES

Cable cover extension kit

Cables

Control panel alu frame

Control panel cover

Control panel gimbal bracket

Distribution units

External gps antenna

Interceptor fronts

Interceptors

KIT BOXES

Servo unit